German
NERO II-Powerline INTRO II-Radio Electronic Controls Venetian Blind Switches Industrial Switches
You are here: Home > Home Automation > Details
 

NERO II SM DIN Switching Module / Switching relais for DIN Rail

The Powerline switching unit NERO II SM DIN is a convenient and secure solution for remote control of lights, electrical outlets or electrical power for a circuit or an area (e.g. switch-off of the stand-by load or of potentially dangerous household appliances).

Features

  • Receiving of remote control commands via the 230V- electricity network
  • Adjustable functioning (normally open or normally closed)
  • Programmable motor operating time of 0.5 sec. - 10 min. (factory setting: 120 sec.)
  • Potential-free contact by removing the bridge L - (L)
  • Adjustable operating mode (pulse / shutters / blinds / continuous operation)
  • Locking of controls to prevent against external remote automatic control commands
  • Optional recovery of the last switching status after power failure
  • Permanent storage of all settings
  • Compatible with all NERO II transmitters
  • Compatible with all INTRO II radio transmitters with the aid of a NERO II TK transcoder

Connections

  • L, N - electricity network (230 V~)
  • Input / Output loads (potential-free, max. 32 A)
  • Individual operation 

- Pushbuttons

- external control with potential-free switching contacts

Technical Specifications

Operating voltage: 230 V / 50 Hz
Switching voltage: max. 230 V AC / 24 V DC (potential-free)
Breaking capacity: max 32 A (cos phi=1), 20 A (mixed loads)
Temperature range: 0 °C to +45 °C
Power consumption: 0,8 W
Protection rating: IP 20
Measurements: 90 mm x 34 mm x 65 mm (H x W x D)
Assembly: to a 35 mm DIN Rail (2TE)

ColorArticle No.PUCat
Black8422 DIN12


back to product list